Custom Cutting
Any shape, any size — from a single 500 × 500 mm sheet
In short
CUPAL® custom cutting means we cut the exact shape your joint needs out of a copper-aluminium bimetal board — a disc, a strip, a rectangle or a custom contour, in 0.5–2.0 mm. This is the service the electrical webshops that stock catalogue sizes cannot offer: there you fit your design to the available sizes, here your design sets the size. Quote within 24 hours from a drawing (DXF, PDF or JPG), production in 5–10 working days.
- 0.5–2.0mm
- Cuttable thickness
- 500 × 500mm
- Minimum one raw board
- 24h
- Quote from a drawing
- 5–10days
- Production lead time
When is cutting to size worth it over a stock size?
We stock 11 washer sizes (M6 to M20) and four sheet thicknesses in a 500 × 500 mm board. While your joint fits those, the stock size is faster and cheaper. Custom cutting earns its place when the lug footprint matches no standard washer, when a busbar transition needs a 3–10 mm segment with its own hole pattern, when you are producing the same non-standard disc in series, or when a cabinet needs a transition plate of a specific contour. In those cases we buy the material as a board and cut your parts from it — a 500 × 500 mm board in 1.0 mm is HUF 60,000 net, and in theory 144 squares of 40 × 40 mm fit into it (12 × 12); actual yield depends on the cutting method and the tolerance you need. The per-piece price is always calculated from the drawing and the quantity.
Need a contoured part rather than a disc or strip? Whether laser cutting or a punching tool pays off depends on quantity and how final the drawing is — see laser cutting or punching for custom CUPAL parts.
Disc (Ronde)
Rectangle in custom size
Strip in any width
Custom contour from drawing


How ordering works
Send the drawing or dimensions
DXF, PDF or even JPG — we accept any format. If you have no drawing, describe the dimensions and we'll draw it.
You get a quote quickly
We send a custom price within 24 hours, calculated from quantity and dimensions.
We cut it precisely
We cut according to the specified dimensions and shape — every piece is quality-checked.
We pack and ship
Carefully packed, ready to ship. Within the EU too.
Available thicknesses for cutting
0.5 mm, 1.0 mm, 1.5 mm and 2.0 mm — we cut in all 4 thicknesses.
Minimum order
1 sheet (500 × 500 mm) of base material — we cut the requested shapes from this.
Lead time
Depends on the cutting — we specify this in the quote.
Send the drawing or describe the dimensions
Write to us by email or fill in the form — the quote comes within 24 hours.
Frequently asked questions about custom cutting
Thicknesses available for cutting
0.5 mm, 1.0 mm, 1.5 mm and 2.0 mm: parts are available in all four thicknesses.
Minimum order
One 500 × 500 mm sheet of base material, from which your parts are cut.
Lead time
5–10 working days of production; 2–4 weeks door to door within the EU. The quote gives the exact date.
Cut to your drawing, from a single 500 × 500 mm sheet
Discs, strips, rectangles or any contour from CUPAL sheet. Send your drawing or describe the dimensions, and you get a quote within 24 hours on working days.
Get a Quote Now