CUPAL technical datasheet: 70/30 copper-aluminium bimetal sheet
In short
CUPAL® 70/30 is a copper-aluminium bimetal sheet: copper roll-bonded onto aluminium, 70 % aluminium and 30 % copper by layer thickness. Conductivity is 41.9 MS/m (about 72 % IACS) and density 4.6 g/cm³. In the 500 × 500 mm sheet, 0.5 and 1.0 mm are stock items; 1.5 and 2.0 mm are made to order.
- 41.9MS/m
- Conductivity (≈72 % IACS)
- 4.6g/cm³
- Density
- 0.5–2.0mm
- Sheet thickness
- 500 × 500mm
- Stock sheet
This page holds the material data. If your drawing or bill of materials carries a distributor code instead (880111, VCUP2, ICALCU10CS), the CUPAL part number cross-reference maps it to our sizes.
Formats and stock
The base format is a 500 × 500 mm sheet. The 0.5 and 1.0 mm gauges are stock items, delivered 2–10 working days from order. The 1.5 and 2.0 mm gauges are made to order, with 5–10 working days of production. Each SKU links to its row on the CUPAL sheet product page, where you will find the net list price and the quantity selector.
| SKU | Thickness | Sheet | Theoretical mass | Availability |
|---|---|---|---|---|
| TCUP05 | 0.5 mm | 500 × 500 mm | 0.58 kg | Stock |
| TCUP10 | 1.0 mm | 500 × 500 mm | 1.15 kg | Stock |
| TCUP15 | 1.5 mm | 500 × 500 mm | 1.73 kg | Made to order |
| TCUP20 | 2.0 mm | 500 × 500 mm | 2.30 kg | Made to order |
The larger 500 × 2000 mm sheet is available on request. It has no list price; we quote within 24 hours.
| Thickness | Sheet | Theoretical mass | Availability |
|---|---|---|---|
| 0.5 mm | 500 × 2000 mm | 2.30 kg | On request, quoted |
| 1.0 mm | 500 × 2000 mm | 4.60 kg | On request, quoted |
| 1.5 mm | 500 × 2000 mm | 6.90 kg | On request, quoted |
| 2.0 mm | 500 × 2000 mm | 9.20 kg | On request, quoted |
Masses are theoretical: volume × the nominal density of 4.6 g/cm³. A real sheet differs slightly within the thickness tolerance.
The same material also comes as finished parts: CUPAL strip in the standard 500 × 40 × 0.5 mm size, CUPAL washers in 11 sizes from M6 to M20, and CUPAL plates for busbar and terminal joints. If none of them fits the joint, we supply parts cut from the sheet to your drawing. A partner does the cutting; see custom cutting.
Layer build-up per gauge
The 70/30 ratio refers to layer thickness: 30 % of the sheet thickness is copper and 70 % is aluminium. That gives the nominal copper-layer thickness, which is the figure that matters for current rating, deburring and bending.
| Sheet thickness | Copper layer (nominal) | Aluminium layer (nominal) |
|---|---|---|
| 0.5 mm | 0.15 mm | 0.35 mm |
| 1.0 mm | 0.30 mm | 0.70 mm |
| 1.5 mm | 0.45 mm | 1.05 mm |
| 2.0 mm | 0.60 mm | 1.40 mm |
These are nominal values derived from the 70/30 layer ratio. If your specification sets a minimum copper thickness, state it in the enquiry and we will confirm it before you order.
By mass the split is different. With copper at 8.96 g/cm³ and aluminium at 2.70 g/cm³, about 59 % of the sheet's mass is copper: 0.3 × 8.96 / (0.3 × 8.96 + 0.7 × 2.70) = 0.587. The same two layers give a density of 0.3 × 8.96 + 0.7 × 2.70 = 4.58 g/cm³, which matches the 4.6 g/cm³ on this sheet.
Electrical properties
| Property | Value | Note |
|---|---|---|
| Electrical conductivity | 41.9 MS/m | = 41.9 m/(Ω·mm²) |
| Conductivity in % IACS | ≈72 % IACS | 41.9 / 58.0 = 0.722; 100 % IACS = 58.0 MS/m (annealed copper, IEC 60028) |
| Resistivity | 0.0239 Ω·mm²/m | = 1 / 41.9 |
| Cross-section for equal conductance vs copper | 1.41 × | material data |
| Cross-section for equal conductance vs aluminium | 0.906 × | material data |
| Mass for equal conductance vs copper | ≈71 % | (58.0 / 41.9) × (4.6 / 8.96) = 0.71 |
Against the IACS reference copper (58.0 MS/m) the cross-section ratio is 58.0 / 41.9 = 1.38. The material-data factor of 1.41 is slightly higher, so it is the more conservative value for sizing. Sized for the same conductance, a CUPAL part weighs about 71 % of the copper part, not half. The full comparison with copper and aluminium is in CUPAL, copper or aluminium?.
Physical and mechanical properties
| Property | Value | Unit |
|---|---|---|
| Density | 4.6 | g/cm³ |
| Thermal conductivity | 265 | W/(m·K) |
| Coefficient of linear thermal expansion | 21.8 | 10⁻⁶/K |
| Modulus of elasticity | 81 | kN/mm² |
| Tensile strength | 130–180 | N/mm² |
| Bond strength between layers | 70–110 | N/cm strip width |
| Temper | soft | – |
Surface hardness
| Side | Vickers | Brinell |
|---|---|---|
| Aluminium side | 30–40 HV 0.2 | 30–40 HB 2.5/62.5 |
| Copper side | 50–70 HV 0.2 | 50–70 HB 2.5/62.5 |
Layer materials
| Property | Aluminium layer (carrier) | Copper layer (cladding) |
|---|---|---|
| Grade | AL 99.5 | E1-Cu58 |
| Material number | 3.0255 (DIN 17007) | 2.0065 (DIN 1787) |
| Other designation | EN AW-1050A | CU/a1 (NF A 53-100) |
| Purity | min. 99.5 % Al | Cu 99.9 % |
The copper is cold roll-bonded onto the aluminium and then diffusion-bonded by heat treatment. Our raw material comes from c:met GmbH in Wendelstein, Germany, the CUPAL trademark holder, certified to ISO 9001:2015. HIDRA-MIX Kft. in Budapest sells it in Hungary and the EU.
Surface and edge
| Finish | Description |
|---|---|
| Mill finish (Walzblank) | As rolled; the standard finish |
| Bright (Blank) | Bright, reflective finish |
| Brushed (Gebürstet) | Directionally brushed |
| Satin (Satiniert) | Fine satin finish |
| EDT | Electrical discharge textured, non-directional |
Edges are as cut (GK). Every cut edge shows the copper-aluminium bond line, where both metals meet the environment. In a dry indoor joint this does not matter. Outdoors or in humid conditions the edge needs to be protected or covered; ask us before you specify such a joint.
Processing
Cold forming: bending, deep drawing, punching, stretch forming, edge bending, profiling, beading, riveting and flanging.
Joining: the copper side can be soft-soldered and electroplated with standard processes. In electrical work CUPAL mostly goes into bolted joints.
Cutting and punching: custom parts are cut by our partner, by laser, punching tool or guillotine shear. Which process pays off when, and what to watch at the bond line, is covered in laser cutting or punching. Order through custom cutting; the smallest order is one 500 × 500 mm sheet of material.
Heat-treatment limit
CUPAL can be heat-treated at no more than 260 °C for no more than 4 hours. This is the limit for annealing and processing (removing the work hardening from cold forming), not a service temperature. Heated longer or hotter, the intermetallic layer at the copper-aluminium interface grows uncontrolled and weakens the bond between the layers.
The permissible operating temperature of a finished joint is set by its components (lug, bolt, insulation) and by the equipment standard. If your project needs a material-side limit, ask us and we will check it with our supplier.
Standards and certificates
| Item | Reference |
|---|---|
| Aluminium layer | DIN 17007 / Werkstoff-Nr. 3.0255 |
| Copper layer | DIN 1787 / Werkstoff-Nr. 2.0065 |
| Material certificate | EN 10204 2.2 test report with every delivery; 3.1 inspection certificate on request |
| Supplier quality management | ISO 9001:2015 (c:met GmbH) |
Every delivery ships with an EN 10204 2.2 test report; a batch-specific 3.1 inspection certificate is available on request. The EN 10204 material certificate article explains the difference.
CUPAL transition parts usually sit where an aluminium busbar (DIN 43670) meets a copper busbar (DIN 43671) or a copper lug, in switchgear to IEC 61439, cable connections to IEC 61238 or lightning protection to IEC 62305. Those are standards for the equipment and the joint, not for the CUPAL material. They are summarised on the standards page.
Delivery, storage and ordering
We deliver within Hungary and across the EU, DAP within the EU; collection in Budapest is also possible. Store the sheet in a dry, well-ventilated place.
For a quote, send:
- thickness (0.5 / 1.0 / 1.5 / 2.0 mm);
- size, or a drawing (DXF or PDF) for custom parts;
- quantity, plus the expected repeat volume if there is one;
- whether you need a 3.1 certificate.
We quote within 24 hours. Stock sheet is delivered 2–10 working days from order. Made-to-order gauges and custom cutting take 5–10 working days of production, and a custom order arrives door to door within the EU in 2–4 weeks.
Request a quote: give the thickness and size, or attach the drawing, and we reply within 24 hours.